Console Instructions

Starting the Console -

Plug in the power supply to power on the console.

Press START / ENTER key to go to the Quick Start Mode.

Press LEVEL UP and LEVEL DOWN for 2 sec. to go to the Service Mode.

Press TIME UP and TIME DOWN for 2 sec. to go to the Metric Unit Setting Mode.

Press the PROGRAM key to go to the Programming Mode.

After completing the program settings, press the START / ENTER to start the workout.

Stopping the Console -

The console will stop when the time counts down to zero.

Pressing the STOP / RESET key will stop the console time.

When you stop pedaling unit for 5 seconds the console will go into pause mode.

How to Reset the Console -

To reset entry data during the programming mode, press STOP / RESET key will clear the entry to its default.

To reset console to the programming mode in the middle of a program, press STOP / RESET for 2 seconds during pause mode.

Workout Summary -

Once the program time has counted down to zero, the console will display all the last calculations for 5 minutes presented as a workout summary. The workout summary will be terminated and reset to its defaults if any key is pressed during the 5 minutes.

10

Page 10
Image 10
Ironman Fitness 600e owner manual Starting the Console, Stopping the Console, How to Reset the Console, Workout Summary