Assembly
Step 3
A)Plug the Upper Console Cable, the two Pulse Wires, and the Grounding Wire into the back of the Console. See Figure 3a
B)Secure the Console to the Console Tube and secure in place using four M5*12mm Screws and four Small Washers.
Note: Make sure not to pinch the wire when installing the console.
C)Attach the Bottle Holder to the Console Tube using two Screws.
Upper Console Cable
Pulse Wire
Grounding Wire 
Figure 3a
Console
Console Tube
Small Washer M5*12mm Screw
Bottle Holder
Screw
Figure 3b
7
