Panasonic EY3544-U1 3 ASSEMBLY INSTRUCTIONS

■HOW TO ASSEMBLE SWITCH.

3 ASSEMBLY INSTRUCTIONS

Ref. No. 1A Procedure 1A Attachment of the brush holder.

1. Insert the brush holders on both right and left side.

2. Press fit the lead wires into the lead guide A.

3. Press fit the lead wires into the lead guide B.

4. Insert the carbon brushes.

5. Tighten the holder caps.

Ref. No. 1B Procedure 1A →

→→

→1B Attachment of the switch.

1. Check the lead wires whether they are mounted in the proper

position.

NOTE:

Make sure they are not set on the screw bosses or over the

housing ribs.

EY3544-U1