■HOW TO DISASSEMBLE BLADE CLAMP ASSEMBLY.
2 DISASSEMBLY INSTRUCTIONS
Ref. No. 1A Procedure 1A Removal of the shoe.
1. Loosen a screw (M4X10) with washer tightened on the rear side
of shoe lock lever.
2. Remove the shoe lock lever and loosen the hexagonal head bolt.
NOTE :
Make sure not to lose a hexagonal nut (M4) where located
inside of the shoe lock lever.
Ref. No. 1B Procedure 1A →
→→
→1B Removal of the insulated rubber boot.
1. Wind the insulated rubber boot down started from the motor
side.
NOTE :
The insulated rubber boot may not pull off due to scratched
badly inside of the hook.
3
EY3544-U1