■HOW TO DISASSEMBLE GEAR CASE or MOTOR ASSEMBLY.
Ref. No. 1C Procedure 1A →
→→
→1B →
→→
→1C Removal of the blade clamp block.
1. Loosen four screws (M5X18) where tightening on the gear
housing.
Ref. No. 1D Procedure 1A →
→→
→1B →
→→
→1D Removal of the housing.
1. Loose seven housing screws (4X18).
2. Open the housing B.
3. Take out the motor with gear case assembly from the housing A.
4
EY3544-U1