ENGLISH

USER MANUAL

SKIRT HEIGHT AND OPERATION CHECK

Preliminary procedure

1.Empty the hopper (as shown in the User Manual), because the weight of the waste inside the hopper can affect the skirt height check.

2.Drive the machine on a level floor that is suitable for checking the skirt height.

3.Engage the parking brake with the pedal (82) and the lever (75).

4.Turn the ignition key (69) to “0”.

Side skirt check

5.Release the fasteners (8 and 6), then open the right and left door (7 and 5).

6.Check the side skirts (A, Fig. 19) for integrity.

Replace the skirts when they have cuts (A, Fig. 20) larger than 20 mm or cracks/tears (B) larger than 10 mm (for skirt replacement, refer to the Service Manual).

7.Check that the distance from the floor of the side skirts (A, Fig. 19) is within 0 - 3 mm (see Fig. 21). If necessary, loosen the screws (B, Fig. 19) and adjust the skirt position. Then tighten the screws (B).

Front and rear skirt check

8.Remove the main broom as shown in the relevant paragraph.

9.Check the front (A, Fig. 22) and rear skirts (B) for integrity.

Replace the skirts when they have cuts (A, Fig. 20) larger than 20 mm or cracks/tears (B) larger than 10 mm (for skirt replacement, refer to the Service Manual).

10.Check that the front (A, Fig. 22) and rear skirts (B) slightly rub on the floor (see Fig. 24).

If necessary, loosen the screws (C, Fig. 22) and adjust the skirt position. Then tighten the screws (C).

11.Press the front skirt lifting pedal (81) completely, and check that the front skirt lifts 5 cm approximately.

Release the pedal and check that the skirt does not remain in an intermediate position but returns to its initial position. If necessary, adjust the skirt lifting cable (A, Fig. 23) with the adjuster (B) on the left front side of the skirt (for the front skirt control cable replacement, see the Service Manual).

Reset

12. Assemble the components in the reverse order of disassembly.

P100232

P100233

P100234

Figure 19

Figure 20

Figure 21

P100235

P100236

P100237

Figure 22

Figure 23

Figure 24

26

1463388000(1)2008-05 A

SR 1301 P

Page 91 Page 93
Page 92
Image 92
Nilfisk-ALTO SR 1301 P manuel dutilisation Skirt Height and Operation Check, Preliminary procedure, Side skirt check, Reset
Page 91 Page 93

SR 1301 P specifications

Nilfisk-ALTO SR 1301 P is a highly efficient and versatile scrubber dryer designed for cleaning various types of surfaces in both commercial and industrial environments. This machine strikes a balance between robust performance and user-friendly capabilities, making it a preferred choice for professionals seeking reliability and effectiveness in their cleaning operations.

One of the main features of the Nilfisk-ALTO SR 1301 P is its compact design, allowing it to easily navigate tight spaces while still delivering powerful cleaning results. This maneuverability does not compromise its ability to cover larger areas, making it suitable for varied environments such as retail stores, warehouses, and schools. The machine is equipped with a robust cleaning mechanism, utilizing dual counter-rotating brushes that efficiently tackle dirt and grime on floors of all types.

The SR 1301 P boasts advanced technology that enhances its cleaning performance. The machine employs an innovative water management system, which optimizes water and detergent usage, ensuring thorough cleaning without excessive waste. This environmentally friendly approach not only conserves resources but also reduces operational costs.

Another significant characteristic of the Nilfisk-ALTO SR 1301 P is its intuitive control panel, which simplifies operation for users. Features such as variable brush pressure settings allow operators to adjust the cleaning intensity based on the specific surface conditions, ensuring effective cleaning tailored to the task at hand. Additionally, the integrated battery system provides cordless operation, offering uninterrupted cleaning cycles and greater flexibility in movement.

The machine's maintenance has also been thoughtfully designed. The removable tank facilitates easy cleaning and refilling, while the durable construction ensures prolonged lifespan and reliability under demanding conditions. This ease of maintenance aligns with the overall efficiency the SR 1301 P brings to cleaning routines.

With its combination of powerful performance, advanced technology, and ease of use, the Nilfisk-ALTO SR 1301 P stands out as an excellent choice for businesses aiming to maintain cleanliness with minimal effort. Its effective features are designed to boost productivity while delivering superb cleaning results across a wide range of surfaces. This scrubber dryer exemplifies a modern solution for demanding cleaning needs, proving that innovation and efficiency can go hand in hand.
Top Page Image Contents