ENGLISH
USER MANUAL
1.Drive the machine on a level floor.
2.Engage the parking brake with the pedal (82) and the lever (75).
3.Turn the ignition key (69) to “0”.
4.Remove the screws (48), then disengage the fasteners (49) to remove the left side bulkhead (47).
5.Remove the mounting screws, then remove the engine exhaust end pipe (53).
6.Clean the spark screen as shown in the Petrol Engine Manual.
7.Perform steps 4 and 5 in the reverse order.
1.Drive the machine on a level floor.
2.Engage the parking brake with the pedal (82) and the lever (75).
3.Turn the ignition key (69) to “0”.
4.Open the hood (23) and fasten it with the support rod (55).
5.Remove the screws (45), then disengage the fasteners (46) to remove the engine guard (44).
6.Clean/replace the spark plug (51), as shown in the Petrol Engine Manual.
7.Perform steps 4 and 5 in the reverse order.
1.Drive the machine on a level floor and engage the parking brake with the pedal (82) and the lever (75).
2.Turn the ignition key (69) to “0”.
3.Open the hood (23) and fasten it with the support rod (55).
4.Remove the cover (A, Fig. 29) and mark the positions of the fuses shown on the adhesive.
5.Check/replace the relevant fuse among the following (B):
•F1 fuse (30 A): Key circuit
•F2 fuse (30 A): Filter shaker
•F3 fuse (30 A): Vacuum system
•F4 fuse (30 A): Hydraulic pump
•F5 fuse (10 A): Flashing light (optional)
•F6 fuse (10 A): Working light (optional)
•F7 fuse (10 A): Hopper actuator
•F8 fuse (30 A): Spare fuse
6.Check/replace the FD (70 A) charging system fuse (50).
7.Check for deactivation of one of the following fuses, then reset it after the relevant motor has cooled down:
•FA fuse (C, Fig. 29): Right side broom motor circuit breaker
•FB fuse (D): Left side broom motor circuit breaker (optional)
•FC fuse (E): Main broom motor circuit breaker
8.Assemble the components in the reverse order of disassembly.
AE C D
B
P100249
Figure 29
30
SR 1301 P