ENGLISH

USER MANUAL

ENGINE OIL LEVEL CHECK

1.Drive the machine on a level floor.

2.Engage the parking brake with the pedal (82) and the lever (75).

3.Turn the ignition key (69) to “0”.

4.Open the hood (23) and fasten it with the support rod (55).

5.Remove the screws (45), then disengage the fasteners (46) to remove the engine guard (44).

6.Unscrew the engine oil level plug (34) and clean it with a clean cloth. Fully screw down the oil level plug (34) then unscrew it again after a few seconds, and check that the oil level is between the ADD (minimum level) and FULL (maximum level) marks (A, Fig. 27).

If the oil level is lower than the minimum mark (ADD), remove the filler plug (35) and top up.

CAUTION!

Top up using the same type of oil as that in the engine.

7.Install the filler plug (35) and check the oil level as shown in the previous steps. Perform steps 3 to 5 in the reverse order.

FULL

ADD

A

P100240

Figure 27

ENGINE OIL CHANGE

CAUTION!

It is advisable to change the oil when the engine is still hot, to make the oil downflow easier.

1.Drive the machine on a level floor.

2.Engage the parking brake with the pedal (82) and the lever (75).

3.Turn the ignition key (69) to “0”.

4.Remove the screws (48), then disengage the fasteners (49) to remove the left side bulkhead (47).

5.Open the hood (23) and fasten it with the support rod (55).

6.Remove the screws (45), then disengage the fasteners (49) to remove the engine guard (44).

7.Remove the engine oil filler plug (35).

8.Remove the engine oil drain plug (38) from the hose (40) and drain the oil into a suitable container.

CAUTION!

The discharged engine oil must be disposed of properly according to the Law in force.

9.Install the engine oil drain plug (38) to the hose (40).

10.Top up with new oil through the filler (35).

NOTE

As for engine oil type and quantity, see the Technical Data chapter and the Petrol Engine Manual.

11.Install the filler plug (35).

12.After a few seconds, unscrew the engine oil level plug (34) again and check that the oil level is between the ADD (minimum level) and FULL (maximum level) marks (A, Fig. 27).

If necessary top up. Screw down the oil level plug (34).

13.Perform steps 4 to 6 in the reverse order.

28

1463388000(1)2008-05 A

SR 1301 P

Page 94
Image 94
Nilfisk-ALTO SR 1301 P manuel dutilisation Engine OIL Level Check, Engine OIL Change

SR 1301 P specifications

Nilfisk-ALTO SR 1301 P is a highly efficient and versatile scrubber dryer designed for cleaning various types of surfaces in both commercial and industrial environments. This machine strikes a balance between robust performance and user-friendly capabilities, making it a preferred choice for professionals seeking reliability and effectiveness in their cleaning operations.

One of the main features of the Nilfisk-ALTO SR 1301 P is its compact design, allowing it to easily navigate tight spaces while still delivering powerful cleaning results. This maneuverability does not compromise its ability to cover larger areas, making it suitable for varied environments such as retail stores, warehouses, and schools. The machine is equipped with a robust cleaning mechanism, utilizing dual counter-rotating brushes that efficiently tackle dirt and grime on floors of all types.

The SR 1301 P boasts advanced technology that enhances its cleaning performance. The machine employs an innovative water management system, which optimizes water and detergent usage, ensuring thorough cleaning without excessive waste. This environmentally friendly approach not only conserves resources but also reduces operational costs.

Another significant characteristic of the Nilfisk-ALTO SR 1301 P is its intuitive control panel, which simplifies operation for users. Features such as variable brush pressure settings allow operators to adjust the cleaning intensity based on the specific surface conditions, ensuring effective cleaning tailored to the task at hand. Additionally, the integrated battery system provides cordless operation, offering uninterrupted cleaning cycles and greater flexibility in movement.

The machine's maintenance has also been thoughtfully designed. The removable tank facilitates easy cleaning and refilling, while the durable construction ensures prolonged lifespan and reliability under demanding conditions. This ease of maintenance aligns with the overall efficiency the SR 1301 P brings to cleaning routines.

With its combination of powerful performance, advanced technology, and ease of use, the Nilfisk-ALTO SR 1301 P stands out as an excellent choice for businesses aiming to maintain cleanliness with minimal effort. Its effective features are designed to boost productivity while delivering superb cleaning results across a wide range of surfaces. This scrubber dryer exemplifies a modern solution for demanding cleaning needs, proving that innovation and efficiency can go hand in hand.