Ironman Fitness Aeros Assembly, Step, M8X1.25-16 BOLT, M8.2X18-2 FLAT WASHER, M10X1.25-20 BOLT

Assembly

Getting Started - The Ironman Fitness Aeros Elliptical will require some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing material until assembly is complete and unit is working properly. Place the unit on a clean level surface for assembly. Make sure there is easy access to an electrical outlet. Before assembling the unit should be placed as close as possible to its final location. Tools have been provided for use while assembling this product.

Figure 1

Step 1

Secure Rear Stabilizer to the Main Frame using Four M8x1.25-16 Screws and M8.2x18-2 Flat Washers on the top four holes, and Three M10x1.5-20 Bolts and M10x20-2 Flat Washers on the three holes located on the bottom of the Rear Stabilizer.

Figure 2

Step 1:

Secure Left Handlebar to Main Frame using Four M8x 1.25-16 Screws. Attach the Cover over the Handlebar and secure using Two M5x0.8- 12mm Screws. Repeat again using the Right Handlebar.

Figure 1
M8X1.25-16 BOLT
M8.2X18-2 FLAT WASHER
	M10X1.25-20 BOLT
	M10x20-2 WASHER
REAR STABILIZER
Figure 2	LEFT HANDRAIL

RIGHT HANDRAIL

M5X0.8-12MM SCREW

M8X1.25-16

SCREW

COVER