![](/images/new-backgrounds/1115240/11524089x1.webp)
Open Caveats
•CSCdv67594
The following Microsoft Outlook error might occur when the VPN Client connects or disconnects. This occurs when Microsoft Outlook is installed but not configured.
Either there is no default mail client or the current mail client cannot fulfill the messaging request. Pun Microsoft Outlook and set it as the default mail client.
To set Microsoft Outlook as the default mail client,
•CSCdv73541
The make module process fails during installation of the VPN Client for Linux.
Workaround:
The module build process must use the same configuration information as your running kernel. To work around this problem, do one of the following:
–If you are running the kernels from Red Hat, you must install the corresponding
–If you are running your own kernel, you must use the build tree from the running kernel to build the VPN Client. Merely unpacking the source code for the version of the kernel you are running is insufficient.
•CSCdw60866
Getting Entrust certificates using SCEP does not get the Root CA certificate. The Entrust CA does not send the whole certificate chain when enrolling with SCEP. Therefore, making a VPN Client connection might require the manual installation of the Root certificate before or after SCEP enrollment. Without the existence of the Root CA certificate, the VPN Client fails to validate the certificate and fails with the following VPN Client event/error messages:
“Get certificate validity failed”
“System Error: Unable to perform validation of certificate <certificate_name>.”
Release Notes for VPN Client, Release 4.0 through Release 4.0.5.D
| 45 | |
|