Changing Bands
To switch between AM and FM bands, press the CAT button until AM or FM is displayed on the screen. Press one of the two softkeys under the text to select the desired band.
Store Presets
To Store a station into the Preset memory, tune to the station, to enter the preset menu, press the “FWD>>” button. Turn the tune knob in the upper right corner to select the preset location
The screen will display “PR SAVED” and your preset has been stored into memory.
Recall Presets
To recall a preset saved in memory, press the “FWD>>” button to enter the preset menu. use the tune knob in the upper right corner to scroll through the stored preset stations. when the desired preset is displayed, press the ►I SEEK button to select it.
Exit menus
Press the “<<REV” button to exit the preset menu and continue playing the current station. “EXIT” will be displayed when button is pressed. You can also wait the allotted 10 seconds and the menu will exit automatically.
Changing Display:
Press the “i” button to display artist and track information if the current HD Radio station is transmitting that information.
8. Sirius Satellite Radio Operation
Entering Mode Select Menu
Press the “BAND” button a few times until XM is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “SIRIUS” is displayed, press the “FWD>>” button to select the displayed mode.
Channel Up
Turn the rotary TUNE KNOB clockwise to move up through the channels
Channel Down
Turn the rotary TUNE KNOB
Category Selection
Press the “CAT” button then press the button that corresponds with the Category you wish to select.
Store Presets
Press and hold the preset button on which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
7