HP V6.0 Software Adding disk groups using the VSS Configuration Utility

Adding disk groups using the VSS Configuration Utility

After installation, if you need to add disk groups, increase storage in a disk group, or select a new Snapclone disk group, access the VSS Configuration Utility in the Windows Start/Programs menu: Hewlett-Packard/ Hardware Providers/Provider Configuration for EVA

1.To set the SnapClone disk group, check the SnapClone option to select the snapclone type, and then click Select Disk Group. The Select Disk Group window opens.

2.In the Select Disk Group window, click a disk group in the Disk Group List, and select a redundancy type for the snapclone vdisk from the drop-down menu. Redundancy type choices include Default (same redundancy type as the source vdisk), RAID0, RAID1, or RAID5.

3.Click OK to confirm your selections and close the windows.

38 Installation