Configuring VSS/VDS to access Command View:
1.In the Appliance IP Address text box, enter the IP address of the server where Command View is installed and click Logon.
The Enter UserName and Password window pops up.
2.Enter the administrator’s User Name and Password to the Command View system. Click OK. A “loading...” message appears while the system authenticates the logon. The system populates the Configuration Utility window HSV Storage System box with the name of the disk array and (VDS) a list of available disk groups.
If the name of the array does not appear, the logon is incorrect or a communication problem has occurred with the CV workstation. Check your logon and password and check connectivity (for example, a firewall may be interfering with communication). Also refer to “Chapter 4 Troubleshooting” for troubleshooting information.
HP StorageWorks EVA Hardware Providers administration guide | 35 |