10
Steering Wheel Controls
The Multifunction display in the gauge cluster must be in “Audio mode” for
the steering wheel controls to operate the Media Gateway.
Press the “▲” arrow on the steering wheel controls to seek up.
Press the “▼” arrow on the steering wheel controls to seek down.
Storing stations into preset memory
Press “OK” access the preset memory menu.
Use the “▲” and “▼” buttons to cycle through the preset locations (1-18FM, or 1-6 AM)
Press “OK” to store the current station into the location displayed on the
radio, for example PRE1.
Recall a station from preset memory
Press “OK” to access the preset memory menu.
Use the “▲” and “▼” buttons to cycle through the preset locations. When
the desired preset is displayed, wait 3 seconds, the radio will auto select
the station.
PLEASE NOTE: In the 2009 VW CC the “OK” button does not
function. In this vehicle you will only be able to seek through the
stations with the < or > buttons on the left side of the steering wheel.
Delphi Radio Controls
Seek Up
Press the ”SEEK▲” button to seek up to next available station.
Seek Down
Press the ”▼SEEK” button to seek down to the next available station.
Manually Tune
Turn the Tune knob to manually tune. Clockwise will tune up, Counter-
clockwise will tune down.
Storing stations into Preset memory
Tune to a station you wish to save into Preset memory. Press and hold the
Preset button (1-6) where you want to store the preset. Holding the preset
button for two seconds will store the station into memory.
PLEASE NOTE: If using the HDRT in conjunction with the SCC1, the
HD Radio preset text will overwrite the SCC1 preset text, however the
presets will still operate normally.
Recall a station from Preset memory
Press the preset button (1-6) to recall the station stored in that location.