Error Messages

The following table lists the error messages and other warnings displayed in the

monitor, as well as the solutions for dealing with them.

 

Display

Problem

 

Solution

A

 

O(blinks)

Clock not set.

Set clock.

101

 

 

 

 

 

 

B

Battery running low.

Prepare to charge or

12

 

 

 

change battery.

 

 

 

 

 

 

 

N

Battery exhausted.

Charge or change battery.

12

 

Battery exhausted.

 

 

 

 

 

 

 

 

 

 

P

Battery temperature is

Turn off camera, and allow

15

 

Battery temperature

high.

battery to cool down

 

 

high

 

before resuming use. After

 

 

 

 

5 seconds, this message

 

 

 

 

will disappear, the monitor

 

 

 

 

will turn off, and the

 

 

 

 

power-on lamp and flash

 

 

 

 

lamp will blink rapidly.

 

 

 

 

After the lamps blink for

 

 

 

 

30 seconds, the camera will

 

 

 

 

turn off automatically, but

 

 

 

 

you can also press the

 

 

 

 

power switch to turn it off

 

 

 

 

manually.

 

 

 

 

 

 

 

 

Q(● blinks red)

Camera cannot focus.

Refocus.

24, 25

 

 

 

Use focus lock.

90

 

 

 

 

 

Technical

P

Camera cannot perform

Wait until message clears

25

Please wait for the

other operations until

from display automatically

 

camera to finish

recording is complete.

when recording is

 

recording.

 

complete.

 

Notes

O

 

 

 

 

 

 

 

 

N

Write-protect switch is in

Slide write-protect switch

19

 

Memory card is write

“lock” position.

to “write” position.

 

 

protected.

 

 

 

 

 

 

 

 

 

 

 

P

Error accessing memory

Use approved card.

115

 

This card cannot be

card.

Check that connectors

18

 

used.

 

are clean.

 

 

P

 

Confirm that memory

18

 

 

 

card is correctly inserted.

 

 

This card cannot be

 

 

 

 

 

 

 

 

 

read.

 

 

 

 

 

 

 

 

 

 

120

Page 132
Image 132
Nikon COOLPIXS210CB, COOLPIXS210P manual Error Messages, 120