iSymphony SP5BT user manual Operation, To make an outgoing call, To place an active call on Hold

User Manual SP5BT

OPERATION

To make an outgoing call

You may dial using the handset in the normal way and press SEND, or use voice dialing if your mobile phone supports it and is properly set up. Please refer to your mobile phone user manual for voice dial set up details:

►Press multifunction button briefly.

●Voice dialing is activated.

●A tone prompts you to say the name of the person you wish to call.

►Say the name of the person you wish to dial.

●The phone places the call automatically.

●If the phone does not recognize the name spoken, repeat the steps above.

To place an active call on Hold

►Hold the volume down (-) key for 5 seconds

●Call 1 is placed on hold

●Call 2 is answered

►Hold the volume down (-) key again for 5 seconds to switch back to Call 1

To redial the last number

►Hold the volume down (-) key for 2 seconds

►Release after you hear a ringing tone. The last number is automatically redialed.

To mute the microphone during a call

►Simultaneously depress the volume down (-) and up (+) keys

►Press both keys again to cancel the mute function.

To transfer an active call from the headset to the handset

►Hold the volume down (+) key for 5 seconds. The audio is transferred from headset to handset

►Hold the volume down (+) key again for 5 seconds to transfer the call back to the headset.

Use with a PC

The SP5BT can be used with a Bluetooth-enabled PC as a hands-free device for applications such as Skype. Please refer to your PC or software user manual for exact instructions on connecting SP5BT to your PC. Remember to make sure that any software applications you wish to use with the hands-free are configured to route audio through the Bluetooth system and not through the PC speakers.

10