SP5BT | User Manual |
PAIRING
Before use, the headset must be paired with the mobile phone. Pairing needs to be done only once. After initial pairing, the phone and the unit can be reconnected by pressing the multifunction button on the headset before each use.
To pair the headset to a mobile phone:
1)Ensure the headset is powered off – the headset must be powered off to enter pairing mode.
2)Ensure the Bluetooth radio on your mobile phone is powered on. Please refer to the phone user manual for details.
3)Hold the multifunction key on the headset for 5 seconds. A blue LED flashes rapidly, then changes to flash alternately red and blue. The headset is ready to pair.
4)Set the mobile phone to search for Bluetooth devices and follow the instructions on the phone’s screen. Please refer to the phone user manual for details. You will recognize the iSymphony SP5BT headset by its Bluetooth name “iSymphony SP5.”
5)Select the iSymphony SP5BT for pairing. When prompted for a passkey, enter “1234.”
6)Select the newly paired SP5BT for connection. Within a few seconds connection is complete and a blue LED flashes slowly on the headset.
13
