iSymphony user manual Charging, To charge the SP5BT docking base and/or headset

SP5BT User Manual

CHARGING

The docking base and headset can be charged together or separately, using the included AC adapter, car adapter or PC USB cable. Additionally, the docking base can recharge the headset without any external power source.

To charge the SP5BT docking base and/or headset:

1)Connect the charging cable to the charging port on the headset or docking base.

2)Dock the headset into the docking base if you wish to charge both devices together. Slide the CHARGE switch on the docking base to the right.

3)Connect the other end of the charging cable to the AC adapter, car adapter or the USB port of your PC. Charging is indicated by a red LED on the docking base or a red LED on the headset.

4)Allow the headset and/or docking base to charge completely. The normal charging time is 2-6.5 hours. Charging is complete when the charging LED turns off. Please note that charging over USB will take longer than using an AC adapter or car adapter.

5)When charging is complete, slide the CHARGE switch on the docking base to the left (OFF) to extend the standby time of the base.

Charging the headset Charging the docking base

11