Jabra 6430 user manual System Setup and Connections, Charging the Headset

4. System Setup and Connections

This chapter explains how to assemble your Jabra GO solution and connect it to your other office equipment.

4.1Charging the Headset

To charge the headset, insert it into the Travel Charger and connect the mini-USB port on the Travel Charger to a power source as illustrated below. The headset LED will change from red to yellow while charging, then to green when fully charged. If the headset is functioning while charging, the LED can change to other colours and blink to indicate other events/changes in state. See the section “Headset Visual Indicators (LED)” for more.

Tip: The charge time from either PC or car cigarette-lighter socket is much longer than the charge time from mains power.

english

Figure 5: Charging the headset

Jabra GO 6430 User manual

11