Jabra 6470 Configure the base for your desk phone, Connect the base to your softphone PC

US

Step 4: Configure the base for your desk phone

Once the base has established a connection to the desk phone, the optimal clear dial-tone switch and microphone level settings need to be determined.

The wizard will prompt you to call your local Jabra setup server — see the cover of this quick start guide for a list of numbers. This enables the Jabra GO base to test its clear dial-tone switch and mic.-level settings by exchanging signals with the setup server.

Note: If the base is unable to contact the server, you can choose to configure the desk phone manually. See the user manual for more.

To set the clear dial-tone switch position and mic.- level:

1.The touchscreen wizard prompts you to call the Jabra setup server. Follow the on-screen instructions.

There is no clear dial-tone switch accessible to the user on the base — stepping through positions A – G to find the best one occurs automatically.

Equally, the base will determine the optimal microphone level automatically.

Step 5: Connect the base to your softphone (PC)

To use Jabra GO with a softphone, you must first connect the Jabra GO base to your PC via a USB cable. The softphone part of the setup wizard will prompt you to do this.

1.Connect the small connector (mini USB) of the

supplied USB cable to the port marked on the Jabra GO base.

2.Connect the other end of the USB cable to any free USB port on your computer.

Step 6: Enable your softphone interface

1.Insert the CD-ROM included with your headset into your PC and install the Jabra PC Suite software.

The softphone part of the setup wizard will prompt you to do this.

The installation includes the supported softphone drivers necessary to enable the softphone interface.

If you have any questions as you work through the setup wizard, or if you would like to learn more on how to use the many advanced features of your headset solution, please refer to the full user manual. This is included on the CD-ROM in PDF format.

2.Right-click on the Jabra icon in the Windows Notification Area and select Open Device Service.

The Jabra Device Service window opens. This shows the list of softphone drivers installed on your PC. Use the online help available in this window to learn more.

3.Select the softphone you want to use (target softphone) from those available in the Select softphone for outgoing calls drop-down list.