5.5Base Keypad
The Jabra PRO base keypad displays information about the headset and call status, and has controls for call handling. From here, you can change target phone, answer an incoming call, end the current call, configure base settings, or open an audio link to the current target phone.
1 2
6
3
4
5
1Battery icon: indicates the current battery level.
2Headset docking icon: indicates the headset is docked.
3Audio link icon: indicates audio link between base and headset is active.
4Mute icon: indicates the headset microphone is muted.
5Mute button:
6Group call icon: indicates desk phone and softphone calls are merged.
7Phone state icon: indicates desk phone or softphone call states.
8Phone buttons: used for desk phone and/or softphone call handling.
7
8
5.6Base Keypad Visual Indicators
Icon Event
Battery charging
Full battery
Low battery
Very low battery
Headset docked
Unknown headset docked
Headset and base pairing
Muted
IconEvent
Current target phone
Phone ringing
Phone on call
Phone on hold
Phone unplugged
Group call
Audio link between headset and base is active
Searching for headset
5.7Base Audio Indicators
The base speaker is located on the bottom of the base, and plays two distinct sounds.
Incoming call ringtone
Adjust the incoming call ringtone volume using the Jabra Control Center.
1.Launch Jabra Control Center, and select either ´Desk phone´ or ´Softphone´ tab.
2.Adjust the ´Base speaker ring tone level´ slider to the desired setting, and click ´Apply´.
Keypad button clicks
Tapping,
1.Launch Jabra Control Center, and select either ´Desk phone´ or ´Softphone´ tab.
2.Select one of four preset keypad click settings (off, low, medium, or high), and click ´Apply´.
JABRA PRO™ 9450, JABRA PRO™ 9450 FLEX and
JABRA PRO™ 9450 DUO
23