Jabra A320s user manual Setup for Windows 98SE & Windows Me, Setup for Windows 2000 and Windows XP

Setup for Windows 98SE & Windows Me

Note: Internet Protocol routing software is required on Windows 98SE and Windows Me servers. Install and configure the routing software as instructed by the software's manufacturer before you configure the computer as a Network Access server.

Configure the server:

1.From Windows Control Panel, double-click the Network icon.

2.On the Configuration tab, select TCP/IP-> Bluetooth LAN Access Server Driver (scroll down if necessary).

3.Click Properties and select the IP Address tab.

Select Specify an IP address

Enter an IP Address (suggested value - 192.168.1.1)

Enter a Subnet Mask (suggested value - 255.255.255.0)

4.Click OK to close each dialog box, and then click Yes to restart the computer.

Setup for Windows 2000 and Windows XP

If Internet Connection sharing was previously enabled (before BTW was installed) it must be disabled and then re-enabled before the Bluetooth network adapter can use it.

Configure for Internet/LAN:

Before you begin, verify that the:

Bluetooth software is installed and enabled Bluetooth device is turned on

Server has access to the Local Area Network (LAN). If the LAN provides Internet access, the connection can be verified by using the server’s browser to connect to the Internet through the LAN.

1.Configure Bluetooth - right-click the Bluetooth icon in the notification area, select Advanced Configuration, and then

From the Local Services tab, select Network Access, and then click Properties.

From the General tab, in the Select the type of service drop-down list, select Allow other devices to access the Internet/LAN via this computer, and then in the Connection Sharing section, select Configure Connection Sharing to display

-Windows XP - the Network Connections window

-Windows 2000 - the Network and Dial-up Connections window

2.Configure Windows

Right-click Local Area Connection, select Properties, and then

-Windows XP - from the Advanced tab, in the Internet Connection Sharing section, select Allow other network users to connect through this computer’s Internet connection. Then select Bluetooth Connection in the Home Networking drop-down list, if available. (The Home Networking drop-down list is not available on all versions of Windows XP.)

-Windows 2000 - from the Sharing tab, in the Internet Connection Sharing section, select Enable Internet Connection Sharing for this connection.

©2005 All rights reserved. 33