2 Set your Bluetooth phone to ‘discover’ the Jabra BT2090
-Follow your phone’s instruction guide. First make sure that Bluetooth is activated on your mobile phone. Then set your phone to discover new devices. This usually involves going to a ‘setup,’‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
3 | 9 |
- 
BT2090”. Your phone then asks if you want to pair with the headset. Accept by pressing ‘Yes’ or ‘OK’ on the phone. You may be asked 
. Then use 0000 (4 zeros). Your 
Bluetooth
light to steady light.
CONNECTIVITY
MobilSurf
BLUETOOTH
Infrared port Wap options Synchronization Networks
SELECT
DEVICES FOUND
Jabra BT2090
SELECT
Jabra BT2090
Passkey:
****
OK
HANDSFREE
Jabra BT2090 added.
The handsfree is now ready for use
SELECT
Manual pairing mode
pairing process was interrupted, you can manually set the headset to pairing mode.
Make sure the headset is on. Press and hold the answer/end button for approximately 5 seconds until the Bluetooth icon turns
. Then repeat steps 2 and 3 in
the above pairing guide.
CONNECTING WITH YOUR PHONE
used together. When the headset and phone have been paired once, they will automatically connect when the headset is on and Bluetooth is activated on the phone. The headset can be used when it is “connected” to the phone. If the devices are paired, but do not immediately connect, tap the answer/end button. When your headset is connected the Bluetooth connection icon in the StatusDisplay™ will be constant on for 3 seconds.
JABRA BT2090 | 5 |
* Phone dependent
