Mute/un-mute
-To mute, press both volume up and down at the same time. A low beep alert plays during a muted call.
-To
Call waiting and placing a call on hold*
-This lets you put a call on hold during a conversation and answer a waiting call.
-Press the answer/end button once to put the active call on hold and answer the waiting call.
-Press the answer/end button to switch between the two calls.
-Tap the answer/end button to end the active conversation.
HOW THE STATUSDISPLAY™ WORKS
Bluetooth | Indicates if your headset is connected to your |
Indicator | phone |
| - Solid light means headset is connected to your |
| phone |
-Flashing light means headset is in ‘pairing mode’ and ready to be connected to a new phone
Battery | Indicates battery level and if headset is |
Indicator | turned ON |
| - Green light indicates that the headset has more |
| than 10 minutes of talk time remaining |
| - Red light indicates that the headset has less |
| than 10 minutes of talk time remaining |
T | . |
Get an instant status from the Jabra StatusDisplay™ by a tap on |
|
any button on the headset when you are not on a call. |
|
JABRA BT2090 | 7 |
* Phone dependent
