GB What your new headset can do
CN | Your Jabra BT8010 can be connected with up to two devices for phone |
and music features: |
GETTING STARTED
The buttons can activate different functionality, depending on the length of button press.
GB
CN
CN
JA
KO
TH
MA
Phone features
•Answer call
•End call
•Reject call*
•Voice dialing*
•Last number redialing*
•Call waiting*
•Put call on hold*
•Volume control
Music features
•Play/Pause music*
•Stop music*
•Skip track forward*
•Volume control
Instruction: | Duration of press |
Tap | Less than or equal to 0.8 seconds |
Double tap | Twice in less than or equal to 0.8 seconds |
Press | Approximately 0.8 – 1.5 seconds |
Press and hold | Equal or longer than 2.0 seconds |
|
|
1. Charging your headset
Charge your Jabra BT8010 for 2 hours to ensure that it is fully charged. Use only the chargers provided in the box – do not use chargers from any other
CN
JA
KO
TH
MA
* Phone/device dependent
Please consult sections “3. Pairing with a phone or other device” and “7. Working with two connected devices” for additional information.
Specifications
•Up to 10 hours of talk time or up to 300 hours of standby time or up to 6 hours of music playing time
•Internal rechargeable battery with charging option from AC power supply or PC via USB cable
•Weight of mono unit: 23 grams (4/5 oz)
•Total weight including stereo unit: 37 grams (11/3 oz)
•Operating range up to 10 metres (33 feet)
•Advanced Audio (A2DP), Remote Control (AVRCP) as well as headset and
•Bluetooth specification 2.0 (See Glossary, page 20)
devices as this might damage your Jabra BT8010.
Connect the mono unit to the AC power supply to charge from a power socket, or charge directly from your PC with the provided USB cable. When the display indicates “Charging complete” the headset is fully charged. The stereo unit does not require separate charging, as it draws power from the mono unit.
2.Turning your headset On and Off
•Slide the On/Off/Pairing button to the on position, in order to activate the headset. The display will indicate the welcome text.
•Slide the On/Off/Pairing button back to the off position, in order to deactivate the headset.
3.Pairing with a phone or other device
Before you can use your Jabra BT8010 you must pair it with a mobile phone and/or another Bluetooth enabled device. The first time you turn on your BT8010 (or if factory reset via the menu), it will automatically enter pairing mode. In this case skip directly to point 2 below. When pairing with your second device, please start with point 1 below.
1.Put the headset into pairing mode
•Turn the headset on
•Slide the On/Off/Pairing button forward until the display indicates “Pairing mode”, then release the On/Off/Pairing button allowing it to slide back to on
RELEASE YOUR JABRA | Jabra BT8010 Bluetooth headset | ||
|
|
