SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

DISHMACHINE OPERATING INSTRUCTIONS

PREPARATION: Before proceeding with the start-up of the unit, verify the following:

1.Close door(s) on dishmachine.

2.Close the drain valve(s).

POWER UP (ELECTRICALLY-HEATED MODELS): To energize the unit, turn on the power at the service breaker. The volt- age should have been previously verified as being correct. If not, the voltage will have to be verified.

POWER UP (GAS-HEATED MODELS): To energize the unit, turn on the power at the service breaker. The voltage should have been previously verified as being correct. If not, the voltage will have to be verified. Ensure that the gas service is connected and that gas is flowing to the machine. Without gas, the water will not reach the required minimum temperatures that the machine is designed to operate at.

POWER UP (STEAM-HEATED MODELS): To energize the unit, turn on the power at the service breaker. The voltage should have been previously verified as being correct. If not, the voltage will have to be verified. Ensure that the steam service is con- nected and that steam is flowing to the machine. Without steam, the water will not reach the required minimum temperatures that the machine is designed to operate at.

FILLING THE WASH TUB: Ensure that the delime switch is in the NORMAL position, and place the power switch into the ON position. The machine should fill automatically and shut off when the appropriate level is reached (just below the pan strainer). The wash tub must be completely filled before operating the wash pump to prevent damage to the component. Once the wash tub is filled, the unit is ready for operation.

Machines equipped with prewash sections should not be run without water in those sections. This can cause damage to components.

WARE PREPARATION: Proper preparation of ware will help ensure good results and less re-washes. If not done properly, ware may not come out clean and the efficiency of the dishmachine will be reduced. It is important to remember that a dishmachine is not a garbage disposal and that simply throwing unscraped dishes into the machine simply defeats the purpose altogether of washing the ware. Scraps should be removed from ware prior to being loaded into a rack. Pre-rinsing and pre-soaking are good ideas, especially for silverware and casserole dishes. Place cups and glasses upside down in racks so that they do not hold water during the cycle. The dishmachine is meant not only to clean, but to sanitize as well, to destroy all of the bacteria that could be harmful to human beings. In order to do this, ware must be properly prepared prior to being placed in the machine.

DAILY MACHINE PREPARATION: Refer to the section entitled “PREPARATION” at the top of this page and follow the instruc- tions there. Afterwards, check that all of the chemical levels are correct and/or that there is plenty of detergent available for the expected workload.

WASHING A RACK OF WARE: To wash a rack, simply slide a rack of soiled ware into the load end of the machine. Once the the machine is started, it should pull the rack through the machine and push it out the unload end. Once a rack has started through, you may put another rack in.

OPERATIONAL INSPECTION: Based upon usage, the pan strainers may become clogged with soil and debris as the work- day progresses. Operators should regularly inspect the pan strainers to ensure they have not become clogged. If the strainers do, they will reduce the washing capability of the machine. Instruct operators to clean out the pan strainers at regular intervals or as required by work load.

NOTE: On units equipped with prewash sections (AJ-66 & AJ-80), operators should also take the time to inspect the prewash section strainers and clean them as required by workload.

AJ-44T Series Technical Manual 7610-003-07-21

Issued: 03-21-2006 Revised: N/A

32

Page 39 Page 41
Page 40
Image 40
Jackson AJ-80TE, AJ-66TG, AJ-66TE, AJ-44TG, AJ-66TS, AJ-44TE, AJ-80TS, AJ-44TS technical manual Dishmachine Operating Instructions
Page 39 Page 41

AJ-66TS, AJ-44TG, AJ-66TG, AJ-44TS, AJ-80TS specifications

The Jackson AJ series is well-known for its robust design and reliable performance in the realm of advanced air-jet weaving technologies. Among the various models, the AJ-80TE, AJ-44TE, AJ-66TE, AJ-80TS, and AJ-44TS stand out for their unique features, cutting-edge technologies, and versatility in textile production.

The AJ-80TE is designed for high-speed and efficient weaving, making it ideal for modern textile manufacturing. It offers an impressive production capacity while maintaining a high level of precision. This model incorporates a high-performance air-jet system that ensures quick replenishment of the weft yarn, significantly reducing downtime during production. With a robust construction, the AJ-80TE can handle a wide variety of fabrics, including heavier materials, ensuring adaptability and durability.

Similarly, the AJ-44TE model showcases advanced weaving capabilities with an emphasis on versatility. It is engineered to produce a broad range of textiles, from lightweight fabrics to more substantial materials. The innovative air-jet technology utilized in the AJ-44TE allows for smooth operation and enhanced fabric quality. Its user-friendly interface simplifies the setup process, enabling operators to switch between different fabric types with minimal effort.

The AJ-66TE model presents additional advancements, featuring a sophisticated control system that optimizes weaving patterns. This model is particularly noted for its precision in producing intricate designs, making it a perfect choice for high-end textile applications. Its energy-efficient design also contributes to lower operational costs, aligning with the industry's increasing focus on sustainable production practices.

Moving on to the AJ-80TS and AJ-44TS models, these machines integrate state-of-the-art technologies that enhance user experience and operational efficiency. Equipped with advanced sensors and automation features, these machines can monitor weaving conditions in real-time, ensuring consistent quality and minimizing fabric defects. The AJ-80TS is specifically tailored for larger production runs, while the AJ-44TS excels in versatility, accommodating a wide range of fabric specifications.

In summary, the Jackson AJ series, comprising the AJ-80TE, AJ-44TE, AJ-66TE, AJ-80TS, and AJ-44TS, represents the forefront of air-jet weaving technology. Their combination of robustness, versatility, and cutting-edge features makes them indispensable in modern textile manufacturing, fulfilling the demands for both efficiency and high-quality output. As the industry continues to evolve, these machines stand ready to meet new challenges, empowering manufacturers to push the boundaries of textile innovation.
Top Page Image Contents