ENGLISH
Controlling Whirlpool Action
The whirlpool action in your bath is influenced by three factors – direction of flow, force of water, and force of air. All whirlpool baths manufactured by Jacuzzi Whirlpool Bath© are equipped with adjust- able PowerPro® jets, that may be adjustable for one or more of the three factors.
Direction: To change the direction of the water flow, swivel the jet nozzle to the desired angle. The jets can be directed individually toward any location on your body to provide a hydromassage. The jets can also be adjusted so that they all point in the same direction (clockwise or counterclockwise) to circulate the water in a circular motion around the bath, causing a total whirlpool effect.
Water Force: The high volume, fully adjustable jets can be ad- justed to control the force of the water coming into the bath. For robust action, increase the force of the flow by rotating the jet handles to the left (counterclockwise). For a more gentle effect, rotate the handles to the right (clockwise). Never run the whirlpool system with all the jets closed.
Force of Air: Two knobs located on the bath serve as controls for the air induction system. The intensity of the hydromassage whirl- pool action is determined by the amount of air inducted into the wa- ter. As the amount of air is increased, the hydromassage action increases. For maximum air induction, rotate the control knobs fully counterclockwise to the largest circles. For fewer air bubbles, de- crease the amount of air induction by rotating the control knob clock- wise. When the knobs are turned to the smallest circles, only water is being circulated.
JETS
DIRECTIONALLY | FULLY |
ADJUSTABLE | ADJUSTABLE |
TYPICAL BATH FITTINGS
COMFORT PLUS |
ON/OFF SWITCH |
AIR CONTROL |
KNOBS |
FULLY ADJUSTABLE JETS |
SUCTION |
COVER |
WATER RAINBOW |
FILL SPOUT (OPTIONAL) |
DRAIN/OVERFLOW |
(OPTIONAL) |
AIR INDUCTION CONTROLS
TURN CLOCKWISE TO | TURN |
REDUCE AIR FLOW | TO INCREASE AIR FLOW |
RapidHeatTM Operation
Once the heater is installed and the whirlpool pump is operating, the heating function is totally automatic. The heater will help main- tain the temperature of the water in the bath.
Vacuum Switch
The heater is equipped with a preset vacuum switch which will not allow the heater to turn ON if the pump is not running with water flowing through the whirlpool system.
High-Limit Switch
The heater includes an exclusive
HIGH LIMIT RESET | HEATER ON |
OVER HEAT | HEATER ON |
| |
PROTECTION |
|
PUSH TO RESET |
|
10
Jacuzzi Whirlpool Bath© BP43000 2/05
