Legs Installation | Jacuzzi GL25, GA99, GL26, GA95 specs

Legs Installation:

• Place Ring upside down to identify the dimples as shown in

Fig. 1.

• Locate the Leg brackets and place them as shown in Fig. 5.

• Using a Flat head screwdriver, attatch the leg bracket as shown

��

in Fig. 5 and fasten to the ring using (2) pan head screws.

��

Dual lock and foam placement detail

Fig. 6

��

Leg Installation Detail

Fig. 7

��

6. FOR ADDITIONAL SAFETY.

After the Ring /Legs have been installed place a bead of clear silicon between the Ring and the Tub rim as shown in Fig. 8.

��

Ring & Legs Bracket Detail

Fig. 5

•Install the Dual Lock onto the top center of each Leg as shown in Fig. 6.

•Install the Dual Lock onto each of the Leg Brackets as shown in Fig. 7.

•Align the Legs to the center of the leg support bracket and angle the bottom so it touches the freestanding skirt and rotate forward until the Dual lock locks in place as shown in Fig. 7.

��

Clear Silicon Installation Detail

Fig. 8

90 DAY (PARTS ONLY) LIMITED WARRANTY ON OPTIONS AND ACCESSORIES

Our warranty covers options and accessories manufactured for the company but not installed by the factory (e.g., ﬁll spout kits, trim kits, skirts, pillows, etc.) against defects in material or workmanship. Warranty coverage begins on the date the option or accessory was originally purchased by the user. Contact our Warranty Department 1-800-288-4002 as to where to send the part to receive a warranty replacement.

#GV64000 02/09

Jacuzzi GL25, GA99 Legs Installation, DAY Parts only Limited Warranty on Options and Accessories

Models: GL25 GA95 GL26 GA99

Legs Installation:

6. FOR ADDITIONAL SAFETY.

90 DAY (PARTS ONLY) LIMITED WARRANTY ON OPTIONS AND ACCESSORIES