INSTALLATION INSTRUCTIONS
Service Access
For partially or fully sunken installations, allow for ac- cess to service connections. It is the installer's respon- sibility to provide sufficient service access. The recom- mended minimum dimensions allowable for service to the bath are shown in the "Service Access" illustration.
Provide adequate area around unit for air circulation for cooling the motor and to supply sufficient air to the jets. Do not insulate this area or around motor.
SERVICE ACCESS (WITHOUT SKIRT)
12"
18"
ALTERNATE 12"
ACCESS
18" MOTOR PREFERRED ACCESS
The Duetta Whirlpool baths should access as shown below.
DUETTA SERVICE ACCESS (WITHOUT SKIRT)
HEATER
12"
FRONT
18"
PREFERRED 12"
ACCESS
18" MOTOR ALTERNATE ACCESS
The Allusion Whirlpool baths should access as shown below.
ALLUSION SERVICE ACCESS
PUMP/MOTOR
ENGLISH
HEATER
FRONT
12"
Service Access (Corner Tubs)
For partially or fully sunken installations, allow for ac- cess to service connections. It is the installer's respon- sibility to provide sufficient service access. The recom- mended minimum dimensions allowable for service to the bath are shown in the "Service Access" illustration.
Provide adequate area around unit for air circulation for cooling the motor and to supply sufficient air to the jets. Do not insulate this area or around motor.
SERVICE ACCESS (CORNER BATHS)
20"
18"A
C
B
36"
24"
RIGHT HAND UNIT SHOWN
A - Preferred access
B - Acceptable alternative if access A is not possible
C - Additional access for equipment (Optional)
18"
12"
ALTERNATE 18" | PREFERRED |
ACCESS | |
ACCESS |
|
In some cases, access may not have been provided because of the design of the bath environment and hav- ing full understanding that in this case, it may be neces- sary to remove the unit for service.
If this is the case, diagnosing a problem may not be possible without complete access to the plumbing sys- tem. This would necessitate the removal of the unit. Although this practice is not commonly implemented, it is an acceptable method.
SERVICE ACCESS
AREA
A
AREA
B
MOTOR
In some cases access may have been provided in Area A but service is required in Area B which requires the unit to be pulled for service and reinstalled.
If service access has not been provided, it is the home owners responsibility to remove the bath and provide the required access, should a repair become necessary.
15
Jacuzzi Whirlpool Bath K339000X 3/06
