ENGLISH

INSTALLATION INSTRUCTIONS

Electrical Connections

Separate circuits, each must be protected by a Ground Fault Circuit Interrupter (GFCI), are required for the pump/ motor and the RapidHeatTM Heater. Refer to the electrical specification for each model on pages 6-8. Install duplex outlets to the studwall underneath the bathtub, at least 4 inches (10,2 cm) above the floor or in accordance with local building or electrical codes. Duplex outlets are not provided. Because these units are manufactured with an elec- tronic control panel no remote switch or timer is necessary.

Tubs with electronic control panels combine the electrical requirements of the pump/motor and electronic controls into a control box. For these units the power supply cord from the pump/motor runs to the control box. The power supply cord from the control box should be connected to the 20 AMP GFCI circuit.

Before installing electrical connections, inspect the pump/motor and heater nameplates and confirm you have 120 VAC, 20 AMP and 15 AMP service requirements. The GFCI circuits must match these requirements. Care must be taken to connect the 20 AMP pump/motor or control box power cord ONLY to the 20 AMP GFCI circuit and to connect the 15 AMP heater power cord ONLY to the 15 AMP GFCI circuit. Do NOT switch power cords and GFCI circuits.

With a #8 solid copper wire, bond the heater to the house electrical panel or approved local bond. A bonding lug is provided on the heater. With another #8 solid copper wire, bond the pump/motor to the house electrical panel or approved local bond. A bonding lug is provided on the pump/motor.

At initial start-up and before each use thereafter with power ON, push the GFCI test button on each circuit. The reset button should pop out. Push this button in to reset. If the interrupter fails to operate in this manner, there is a ground current flowing or a device malfunction, indicating the possibility of electrical shock. Turn off power and do not use the bath until the source of the problem has been identified and corrected.

DANGER: RISK OF ELECTRIC SHOCK. Connect only to a circuit protected by a Ground Fault Circuit Inter- rupter (GFCI).

CAUTION: Operating the motor/pump without enough water in the bath can cause leaking and permanent damage to the pump. Before power is applied to the installation, make sure the switch is in the OFF position to avoid pump damage.

ELECTRICAL CONNECTION

15 AMP, 3 PRONG PLUG

 

(Heater)

 

20 AMP, 3 PRONG PLUG

 

(Pump/Motor)

DUPLEX

 

 

RECEPT.*

 

4" MIN.

 

OR IN

 

ACCORDANCE

 

WITH LOCAL

 

BUILDING OR

 

ELECTRICAL

 

CODES

 

* INSTALL SEPERATE

 

GFCI PROTECTED CIRCUITS,

HEATER

DUPLEX RECEPTS NOT PROVIDED

18

Jacuzzi Whirlpool Bath K339000X 3/06

Page 18
Image 18
Jacuzzi LUXURY BATH SERIES, DESIGNER BATH SERIES manual Electrical Connections

DESIGNER BATH SERIES, LUXURY BATH SERIES specifications

Jacuzzi, synonymous with luxury and relaxation, has taken the art of bathing to new heights with its LUXURY BATH SERIES and DESIGNER BATH SERIES. These collections are crafted to provide an unmatched bathing experience that combines innovative design, advanced technology, and superior comfort.

The LUXURY BATH SERIES is a testament to elegance and sophistication. It features bathtubs and showers that not only serve their functional purpose but also act as stunning focal points in any bathroom. The advanced hydrotherapy options available in these models are a standout feature, allowing users to experience a spa-like retreat in the comfort of their homes. With adjustable water jets and customizable water flow, bathers can tailor their experience to meet individual relaxation and therapeutic needs.

In terms of materials, the LUXURY BATH SERIES is constructed with high-quality acrylic, ensuring durability and easy maintenance. The smooth, non-porous surfaces resist staining and are easy to clean, maintaining their pristine appearance for years. Additionally, the ergonomic design of these baths provides ultimate comfort, allowing users to fully immerse themselves for extended periods without discomfort.

On the other hand, the DESIGNER BATH SERIES showcases a more artistic approach to bathing. This series includes beautifully crafted bathtubs with unique shapes and finishes, making it perfect for those looking to make a bold statement. The design options are vast, ranging from contemporary to classic styles, easily fitting into any décor theme.

Technology plays a crucial role in this series as well. Many models come equipped with advanced audio systems and mood lighting, creating a personalized environment that enhances relaxation. The clever integration of user-friendly touch controls allows for effortless management of water temperature and jet settings, ensuring a seamless and luxurious experience.

Additionally, both series prioritize sustainability and energy efficiency. Jacuzzi's commitment to eco-friendly practices is evident in their designs, which use water efficiently while still offering powerful hydrotherapy.

In summary, the Jacuzzi LUXURY BATH SERIES and DESIGNER BATH SERIES elevate the concept of bathing into a luxurious experience characterized by innovative technologies, high-quality materials, and stunning designs. Whether it’s a tranquil escape or a statement piece in your bathroom, Jacuzzi’s offerings meet the demands of a discerning clientele looking for both style and functionality.