Manuals / Jacuzzi / Lawn and Garden / Hot Tub

Jacuzzi S198 owner manual Framing and Support, Typical Installation

Models: S198

1 20
Download 20 pages 29.27 Kb
Page 5
Image 5

Important: Read complete instructions before beginning installation.

Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly and plumbing and fittings necessary for whirlpool operation. An optional drain/overflow kit is available for installation on the bath.

Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Do not lift the bath by the plumbing at any time; handle by the shell only.

Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the finish, do not install the bath. Damage or defect to the finish claimed after the bath is installed is excluded from the warranty. Jacuzzi Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty information packed with the product.

All bath units are factory tested for proper operation and watertight connections prior to shipping. Note: Prior to installation, the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling. Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or avoided by following this inspection and testing procedure.

Framing and Support

The drain/overflow of the bath extends below the bottom of the bath. Note that this requires a cutout in the floor.

The floor structure beneath the bath must be able to support a total weight of bath, water, and bather. Refer to the table under total weight for your model. The unit must be supported from the bottom of the bath and not from the bath rim or tile flange. If the subfloor is level, no other preparation is necessary. You can proceed to install the bath. If the subfloor is not level, you MUST level the entire surface prior to installing the bath. The use of materials that shim or provide a level installation are allowed provided the method used will insure a level bath that is supported from the bottom. Materials that may be used are a floor leveling compound, mortar, plaster or minimal expansion structural foam having a density of a minimum of 5 lbs./cubic ft; however the bath must remain level in order for it to drain properly and the foam feet must make full contact with the leveling material. Both sides of a joint or splice of subfloor should be level to each other.

The rim of the bath is not designed to support weight. If finish material is to overlap (maximum 1” overlap) or contact the bath, the added weight must be fully self-supporting.

The protective film liner inside the bath should be left there to prevent damage to the finish from shoes, tools, etc. during installation and should not be removed until final cleanup.

Typical Installation

FINISHED

WALL

WALL

CUTOUTS

SPEAKER

WIRES

FOR MODELS WITH TV:

AUDIO CABLES, FAN,

AND TV POWER CORDS

1" X 4" (NOT FOR SUPPORT)

3

Page 4 Page 6
Page 5
Image 5
Jacuzzi S198 owner manual Framing and Support, Typical Installation
Page 4 Page 6

S198 specifications

The Jacuzzi S198 is a state-of-the-art hot tub that promises to enhance relaxation and rejuvenation at home. Designed for those who value both luxury and performance, this model embodies the perfect blend of innovative technology and sophisticated design.

One of the standout features of the Jacuzzi S198 is its ergonomic seating, which is crafted to provide maximum comfort and support. The hot tub comfortably accommodates up to six people, making it ideal for family gatherings or intimate evenings with friends. Each seat is designed with specific hydrotherapy jets to target and soothe key muscle areas, delivering a personalized massage experience.

The S198 incorporates a powerful hydrotherapy system that features adjustable jets. With the ability to customize the intensity and direction of the jets, users can tailor their massage to suit their individual needs. The combination of powerful water flow and strategically placed jets ensures a deeply relaxing experience, helping to alleviate tension and promote well-being.

Another highlight of the Jacuzzi S198 is its advanced insulation technology. The hot tub is designed with layered insulation materials to maintain water temperature for longer periods, which not only enhances comfort but also improves energy efficiency. The improved insulation allows for reduced operating costs while providing a consistently enjoyable temperature.

In addition to its performance features, the S198 also boasts a user-friendly control panel equipped with digital controls. This allows users to easily adjust temperatures, lighting, and jet settings with just a touch of a button. The panel is intuitive, making it accessible for users of all ages.

The aesthetic design of the Jacuzzi S198 is equally impressive. Available in a variety of colors and finishes, it seamlessly integrates into any outdoor or indoor space. The durable acrylic shell is both stylish and tough, resisting fade and wear over time.

Safety is another priority with the S198, which features a comprehensive safety mechanism including a non-slip surface and a lockable cover. This ensures peace of mind for families and individuals, safeguarding against accidents.

In summary, the Jacuzzi S198 is more than just a hot tub; it is a sanctuary for relaxation. With its ergonomic design, adjustable hydrotherapy jets, advanced insulation, and user-friendly technology, the S198 exemplifies modern luxury while ensuring safety and efficiency. Whether you are looking to unwind after a long day or spend quality time with loved ones, the Jacuzzi S198 offers an unparalleled experience that transforms your home into a personal oasis.