CV-A50 / CV-A60

1. General

The difference from the previous manual is that the CCD sensor in CV-A50 is changed to new types. Now the used CCD sensors are: ICX-408AL-6, 409AL-6, 418ALL-6, 419ALL-6.

The CV-A50/A60 is a range of monochrome CCIR and EIA interlaced 1/2” and 1/3” CCD cameras, designed for automated application, featuring an extremely small housing and a wide range of unique functions.

The asynchronous trigger can be set to work in several modes, to allow functions such as pulse width controlled shutter, programmable shutter speed and long time integration.

All mode settings of the camera can be set up via an RS-232C interface, greatly reducing the need for mechanical switches of jumpers.

The CV-A50 and CV-A60 output an analogue video signal, with composite sync.

The latest version of this manual can be downloaded from: www.jai.com

The latest version of Camera Control Tool for CV-A50/60 can be downloaded from: www.jai.com

2. Standard Composition

The standard camera composition consists of the camera main body.

3.Main Features

New compact size 1/2” and 1/3” monochrome CCD cameras

752 (h) x 582 (v) pixels for CCIR, 768 (h) x 494 (v) for EIA

Improved sensitivity, dynamic range and smear performance

High S/N ratio > 60dB

Extended range of functions and options compared to CV-M50

Interlaced or non-interlaced scanning. Field or frame accumulation.

Internal, external HD/VD or random synchronization

Edge pre-select, pulse width and start/stop trigger modes

Long time exposure with external VD pulse

Frame delay readout mode

Exposure enable EEN, write enable WEN and pixel clock out

No mechanical switches or jumpers for mode setting

Short ASCII commands for modes setting via serial port

Shutter speed down to 1/10,000 in 8 steps

Windows 98/NT/ME/2000 setup software

- 2 -

Page 3
Image 3
JAI CV-A60, CV-A50 operation manual General, Standard Composition, Main Features