JAMO AT101 manual Impedance Matching, AT-101JUMBER SETTINGS

IMPEDANCE MATCHING

1.Identify the impedance of your speakers and the impedance requirements of your amplifier

2.Find the tabel which matches your speakers and your amplifier

3.Set the jumbers on the AT-101’s according to the table. The jum- ber settings are determined by the AT-101 with the largest numbers of speakers connected

AT-101 JUMBER SETTINGS

Each AT-101 in the system must have the same jumber setting when the tables below are used

When using speakers with different impedances, consider all speakers to be the same as the lowest impedance speaker.

Speaker impedance: 8 ohm (min)

Amplifier impedance: 8 ohm (min)

Speaker impedance: 8 ohm (min)

Amplifier impedance: 4 ohm (min)

Speaker impedance: 4 ohm (min)

Amplifier impedance: 8 ohm (min)

Speaker impedance: 4 ohm (min)

Amplifier impedance: 4 ohm (min)

NOTE: * = do not use