Brother 9200C owner manual Setting Fax Storage, Changing Remote Retrieval Access Code

Note Press Redial/Pause for each 3.5 second delay, as needed.

5Press Stop to exit.

You cannot change a Paging number or PIN remotely.

Setting Fax Storage

If you set Fax Storage to ON, you will be able to retrieve fax messages from another location, using Fax Forwarding, Paging, or Remote Retrieval functions. The LCD will indicate when you have a fax stored in memory.

1 Press Function, 1, 7, 2. The LCD	FAX STORAGE:OFF?
prompts you to choose a fax LCD.	SELECT	& SET

2Press or to select ON (or OFF) and press Set.

3Press Stop to exit.

If there are faxes in memory when you	ERASE	ALL FAX?
turn the Fax Storage OFF, the LCD	1.YES	2.NO
prompts you to erase any faxes in

memory.

If you press 1, all fax data is erased and Fax Storage is turned off. If you press 2, data is not erased, and Fax Storage remains on.

(See Printing a Fax in Memory, page 5-4.)

Changing Remote Retrieval Access Code

Enter your Remote Retrieval Access Code when the MFC picks up your call, so you can access features remotely. The access code is preset to 1 5 9 , but you can change this. (See Operation from Extension Telephone, page 5-4.)

1Press Function, 1, 7, 3.

2Enter a three-digit number from 000 to 999 and press Set. The “ ” cannot be changed. (Do not use the same digits that appear in your Fax Receive Code.)

3Press Stop to exit.

R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X ) 8 - 2