Brother 9200C owner manual If you are using Windows 2000 Professional, go to

22Click OK.

All the drivers have been installed. Now you can print and scan.

Note If you want to install PaperPort® , MFL Pro, go to the CD section. (See Installing the Brother Software, page 13-27.)

Using a USB Cable to Connect the MFC to the PC (Using Windows® 98, 98SE, ME and Windows® 2000 Professional Only)

Note

Note

IMPORTANT

To install the software using Windows® 2000 Professional, you must be logged on as the Administrator.

Before you can connect the MFC to your computer, you must purchase a USB cable that is no longer than 6 feet (1.8 meters).

If you are using a bi-directional IEEE-1284 compliant parallel cable, see Using a bi-directionalIEEE-1284 compliant parallel cable to Connect the MFC to the PC, page 13-2.

1After you have set up the MFC and checked that it is working properly, make sure that your PC is turned off.

2 Connect the USB

cable to both the MFC

and the PC.

3 Turn on your PC.

Note Please follow the instructions for the operating system you are using.

Note Now begin the installation of the Brother Drivers:

■If you are using Windows® 98, 98SE, ME, go to Step 4.

■If you are using Windows® 2000 Professional, go to page 13-24.

S E T T I N G U P T H E M F C A N D P C T O W O R K T O G E T H E R 13 - 17