Brother 9200C owner manual Video Capture

DIFFICULTY	SUGGESTIONS
“Unable to write to LPT1” or “LPT1	1. Make sure the MFC is on (plugged into the AC outlet) and that it is
already in use” Error Message	connected directly to the computer using the IEEE-1284 bi-directional
appears.	parallel cable. The cable must not go through another peripheral device
	(such as a Zip Drive, Extemal CD-ROM Drive, or Swich box).
“MFC is Busy” or “MFC Connect
	2. Make sure the MFC is not displaying an error message on the LCD
Failure” Error Message appears.
	Display.
	3. Make sure no other device drivers, which also communicate through
	the parallel port, are running automatically when you boot up the
	computer (such as, drivers for Zip Drives, External CD-ROM Drive,
	etc.). Suggested areas to check: (Load=, Run=command lines in the
	win.ini file or the Statup Group).
	4. Check with you compnter manufacturer to confirm that the computer’s
	parallel port settings in the BIOS are set to support a bi-directional
	machine, i.e., Parallel Port Mode-ECP
Video Capture
LCD does not show VIDEO: PRESS	Check the video cable connection to the MFC’s RCA pin jack. Check that
COPY CAPTURE READY	the video equipment is sending a signal (video equipment is turned on and
	set to the correct setting).

23 - 8 T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E