Brother 9200C owner manual Fax Redial, Tone/Pulse For Canada only, Press Redial/Pause

Search

You can search for names you have stored in One Touch and Speed Dial memories. Names are stored alphabetically. (See Storing One Touch Dial Numbers, page 7-1and Storing Speed Dial Numbers, page 7-2.)

1 Place the original face up in the ADF, or face down on the scanner glass.

2 Press Search/Speed Dial, then enter the first letter of the name you’re looking for.

3Press or to search the memory.

4Press Start, when the LCD shows the name you want to call.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the number.

1Press Redial/Pause.

2Press Start.

If you’re sending a fax automatically and the line is busy, the MFC will redial automatically up to three times, at 5 minute intervals.

Tone/Pulse (For Canada only)

If you have Pulse dialing service, but need to send tone signals (for example, for telephone banking), follow the directions below. If you have Touch Tone service, you will not need this feature to send tone signals.

1Lift the handset of an external phone.

2Press #. Any digits dialed after this send tone signals.

3When you hang up, the MFC returns to pulse dialing service.

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 6