Brother 9200C owner manual Installing the Ink Cartridges

Installing the Ink Cartridges

1Check that you turned on the power (by plugging in the power cord) and that the paper cassette is loaded with paper and installed in the MFC. The LCD alternately shows;

Caution

SET CARTRIDGES

PLS OPEN COVER

Close the document cover before you open the Scanner Cover.

2Press the blue Scanner Cover Release Button on the right side of the MFC and lift the scanner cover. After a few seconds, the print head will move left to its replacement position.

3Remove the yellow shipping cover by pulling it toward you and lifting it up and out.

Caution

■The bottom of the yellow shipping cover is wet with ink that will cause stains, so wipe it clean before you place it down. Keep the yellow shipping cover in a safe place.

2

Print Head

1

Yellow Shipping Cover

We recommend that you install the ink cartridges from left to right in this order: Black, Yellow, Cyan, Magenta.

4Open the Black ink cartridge bag and remove the ink cartridge.

5Carefully remove the sealing tape from the bottom of the ink cartridge. Be sure to peel the tape in the direction away from you.

A S S E M B L Y A N D C O N N E C T I O N S 2 - 9