Brother 9200C owner manual See PhotoCapture Center Requirements

ERROR MESSAGES

ERROR MESSAGE	CAUSE	ACTION
NOT REGISTERED	You tried to access a One Touch or Speed	Set up the One Touch or Speed Dial
	Dial number that is not programmed.	number.
		See page 7-1.
NO FILE	The media card in the media drive does not	See PhotoCapture Center™ Requirements,
	contain a .JPG file, or the DPOF print file	page 12-9.
	on the media card selects a .JPG image that
	is not on the card.
PLS OPEN COVER	A page, piece of paper or paper clip, etc.	Press the Scanner Cover Release Button
	may be jammed inside the MFC.	and lift the scanner cover. If you see any
		jammed paper or other item, gently pull it
		out, then close the scanner cover. If the
		error message remains, open and close the
		scanner cover again. If the MFC cannot
		reset itself and return to the date and time
		prompt, it will display MACHINE ERROR
		XX. Please call Brother Customer Service
		and tell them the Machine Error number, at:
		USA:	1-800-284-4329
		From within Canada:	1-800-853-6660
		From within Montreal:	1-514-685-6464
PRINTER JAM	The paper is jammed in the MFC.	See page 23-4.
SET CARTRIDGES	An ink cartridge is not installed properly.	Re-install the ink, seating it properly. See
		page 23-16.
WARMING UP	The print head detects low temperature.	Wait until the MFC warms up.

T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E 23 - 3