Brother 9200C owner manual Quality, Media, Paper Type Suitable print quality

Quality

Select the print quality. The print quality and speed are related. Higher quality takes a longer time to print.

Draft: 300 x 150 dpi. The fastest print mode (approximately two to four times faster than normal mode) and gives lower ink consumption. Use this mode to print large volume documents or a document for proofing.

Normal: 300 x 300 dpi. Recommended mode for ordinary printouts.

Good print quality with typical print speed.

Fine: 600 x 600 dpi. Better print quality than Normal and faster print speed than Super Fine.

Super Fine: 1200 x 1200 dpi. Use this mode to print precise images such as photographs. Since the print data is much larger than Normal mode, processing time, data transfer time, and printing time will be longer.

Media

Select the media (type of paper). The MFC changes the way it places dots depending on the selected media type. To get the best print output, make sure to select the correct media type.

Selecting media type changes the print quality selection to the most suitable one as listed below. We recommend that you print with the preset quality for best printing result.

Paper Type	Suitable print quality
Plain Paper	Normal
Ink Jet Paper (Coated Paper)	Fine
Glossy Paper	Super Fine
Transparency	Normal
Transparency (mirror)	Normal

Note Use only genuine Brother Coated Paper (Ink Jet), Glossy Paper, or Transparencies to get the best print quality. Non-Brother special paper may not produce the best quality.

P R I N T E R D R I V E R S E T T I N G S 15 - 6