Brother 9200C owner manual Setting Ring Delay, Easy Receive

If you are changing the Receive Mode while in another operation, the LCD returns to that operation.

	FAX : FAX ONLY
	EXT	: EXTERNAL TEL / TAD
09/06 15:25 FAX	MNL	: MANUAL

Current Receive Mode

Setting Ring Delay

The Ring Delay setting determines the number of times the MFC rings before it answers. If you have extension phones on the same line as the MFC, keep the Ring Delay default setting of 4. (See Easy Receive, below and Operation from Extension Telephone, page 5-4.)

1Press Function, 1, 2, 1.

2Press or to select how many times the line rings before the MFC answers (00–04) and pressSet. If you select 00, the line doesn’t ring at all.

3Press Stop to exit.

Easy Receive

When you use this feature, you don’t have to press Start when you answer a fax call. Selecting ON allows the MFC to receive fax calls automatically, even if you lift the handset of an extension or external phone. When you see RECEIVE on the LCD or when you hear “chirps” through the handset of an extension phone connected to another wall jack, just replace the handset, and your MFC does the rest. Selecting OFF means you’ll have to activate the MFC yourself, by lifting the handset of an external or extension phone, then pressing Start on

the MFC— OR—by pressing 5 1 if you are not at your MFC. (See Operation from Extension Telephone, page 5-4.)

Note If Easy Receive is OFF and an original is in the ADF, lift the handset of an external or extension phone, press Start, then 2 to activate the MFC.

Note If you’ve set the feature to ON, but your MFC doesn’t automatically connect a fax call when you lift an external or extension phone handset, press the Fax Receive code 5 1.

Note If you send faxes from a computer on the same phone line and the MFC intercepts them, set Easy Receive to OFF.

1Press Function, 1, 2, 2.

2Use or to select ON or OFF and press Set.

3Press Stop to exit.

5 - 2 S E T U P R E C E I V E