Brother 9200C owner manual Color Enhancement, Understand Error Messages, White Balance, Sharpness

Color Adjustment

1Press Function, 5, 5.

2Press or to select RED, GREEN or BLUE and press Set.

3Press or to adjust the degree of color and press Set.

4Return to Step 2 to select the next

color— OR—Press Stop to exit.

Light	Dark
R:Ð	+
G:Ð	+
B:Ð	+

Color Enhancement

1Press Function, 5, 6.

2Press or to select WHITE BALANCE and press Set.

To skip White Balance, press to select SHARPNESS or COLOR DENSITY.

3Press or to adjust the degree of White Balance and press Set.

4Repeat Step 2 and Step 3 to adjust the degree of Sharpness and Color Density

— OR—Press Stop to exit.

■White Balance

This setting adjusts the hue of the white sections of an image. Lighting, camera settings and other influences will effect the appearance of white. The white parts of a picture may appear to be slightly pink, yellow or some other color. By using this adjustment you can correct this effect and bring the white sections back to pure white.

■Sharpness

This setting enhances the detail of an image. It is similar to adjusting the fine focus on a camera. If the focus is off a small amount, you can not clearly see the fine details of an image.

■Color Density

This setting adjusts the total amount of color in the image. You can increase or decrease the amount of color in an image to improve a picture that may appear washed out or weak.

Understand Error Messages

Once you are familiar with the types of errors that might occur while you’re using the PhotoCapture Center™ , you can easily identify and troubleshoot difficulties. When an error message appears on the LCD, the MFC will beep to get your attention.

MEDIA ERROR—This message appears when you insert a media card that is either bad or not formatted, or if there is a problem with the media drive. To clear this error, remove the media card.

W A L K - U P P H O T O C A P T U R E C E N T E R ™ 12 - 8