Brother 9200C Alternating Displays, Function Selection Table, FAX NO. & Start Copy Press Copy

Alternating Displays

When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you’ll probably see most often is shown below. It appears when you place an original in the ADF to tell you that you can dial a number and send a fax, or you can make a copy.

FAX: NO. & START

COPY: PRESS COPY

Function Selection Table

You can probably perform most of these programming settings without the Owner’s Manual. To help you understand the function selections, options and settings that are found in the MFC programs, use the Function Selection Table below:

1. Fax Functions

1. INITIAL SETUP

Function	Description	Factory Setting	Page
1. DATE/TIME	Enter date and time for the	2001 1/1 00:00	4-1
	LCD display and heading on
	fax transmissions.
2. STATION ID	Program your name, fax	—	4-1
	number and telephone
	number to appear on each
	transmitted page.
3. BEEPER	Adjusts volume level of	LOW	4-3
	beeper.
4. SPEAKER	Adjusts the volume of the	LOW	4-4
VOLUME	one-way speaker.
5. RING VOLUME	Adjusts volume of ringer.	LOW	4-4
6. AUTO DAYLIGHT	Changes for Daylight	OFF	4-4
	Savings Time automatically.
7. TONE/PULSE	Selects dialing mode.	TONE	4-3
(For Canada only)
8. LOCAL	Allows you to change the	ENGLISH	See
LANGUAGE	LCD Language to French.		French
(For Canada only)			Manual

3 - 2 O N - S C R E E N P R O G R A M M I N G