Brother 9200C owner manual Setnext, Startto Dial

Press Stop to cancel. If the original was scanned into memory, press 1 to CLEAR it— OR— 2 to EXIT.

If memory is full, and you are faxing a single page, it will be sent in real time.

You can fax a single color page from the scanner glass.

You cannot fax from the scanner glass when the MFC is sending, receiving or printing a fax.

Fax Resolution

Before sending each original, press Fax Resolution repeatedly until the LED for the resolution you want is lit. For standard, turn Fine & Photo lights off. (See Multiple Resolution Transmissions, page 6-11.)

Standard—For most typed documents. (No lights)

Fine—Good for small print; transmits slower than standard resolution.

Photo—Use when document has varying shades of gray; slowest transmission time.

Color fax—Use to send the original in color.

You can also change the fax resolution to S.Fine. Please see Multiple Resolution Transmission, page 6-11.

Contrast

If your original is very light or very dark, you might want to set the contrast accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very dark original.

4Dial the fax number, then press Start. The MFC starts scanning the first page.

5 To send a single page, go to Step 7	MEMORY #01 100%
— OR—	SET:NEXT	PAGE
To send multiple pages, go to Step 6.
	START:TO	DIAL

6Place the next page on the scanner

glass and press Set. The MFC starts scanning. (Repeat Step 6 for each additional page.)

7Press Start to begin dialing.

Note

1Place the original face up in the ADF, or face down on the scanner glass.

2Press Function, 1, 3, 3.

3Press or to select AUTO, S.LIGHT or S.DARK and press Set.

4Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu— OR—Press 2 if you are finished choosing settings and go to step 5.

5Enter the fax number.

6Press Start to send a fax.

S E T U P S E N D 6 - 3