Brother 9200C Advanced Receiving Operations, Operation from Extension Telephone, Remote ACT.ON?

Advanced Receiving Operations

Operation from Extension Telephone

If you answer a fax call on an extension phone or on an external phone in the EXT. jack, you can make your MFC take over by using the Fax Receive Code. When you press the Fax Receive Code 5 1, the MFC starts to receive a fax. (See Easy Receive, page 5-2.)

If you answer a call at an extension or external phone, and no one is on the line, assume you’re receiving a fax. At an extension phone, press 5 1, wait for fax receiving tones (chirps), then hang up. At an external phone, press 5 1 and wait for the phone to be disconnected (the LCD shows RECEIVE) before you hang up. (Your caller will have to press Start to send the fax.)

Changing the Fax Receive Code

The preset Fax Receive Code ( 5 1) might not work with some telephone systems.

Note If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code from 5 1 to # # #.

1Press Function, 1, 2, 3.

2	Press or to select ON (or OFF)	REMOTE ACT.:ON?
	and press Set.
3	If you want to, enter a new Fax Receive	FAX RECEIVE:*51
	Code, then press Set.

4Press Stop to exit.

Printing a Fax in Memory

If you have Fax Storage ON for remote retrieval, you can still print a fax in the memory when you are at your MFC. (See Setting Fax Storage, page 8-2.)

1Press Function, 1, 7, 4.

2Press Start.

3After printing is finished, press Stop to exit.

5 - 4 S E T U P R E C E I V E