6
plug to the yellow VIDEO IN jack and the white plug to the white AUDIO IN jack.
2.Plug the AC adapter into the power jack (marked on the back of the receiver, then into an AC outlet.
3.Loosen the antenna nut and rotate the antenna to a vertical position. Tighten antenna nut so it is snug. Do not
4.Set your TV to monitor the VIDEO INPUT designated for the Receiver.
CHANNEL SELECTION | Manual |
Manual Mode | Auto |
To select one of the two channels manually, press the MANUAL button on the top panel of the Monitor. The green LED will light for the corresponding channel. The receiver will switch to a different channel (1 or 2) each time the MANUAL button is pressed. When you have selected the channel with the active camera, that video will appear on the monitor/TV screen. Each camera must be assigned to a specific channel; both cameras