7
1 2
CAMERA 1
Channel Setting
1 2 1/2
1 2
RECEIVER
Channel Setting
CAMERA 2
Channel Setting
cannot be on the same channel or the signals will cancel out.
Multi-Camera Operation
This wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold separately. IMPORTANT: When using more than one camera, each camera must be assigned to a specific channel using the channel selection switch located on the underside of the camera housing. Select either 1 or 2 for each camera. Each camera must be assigned to a specific channel; both cameras cannot be on the same channel or the signals will cancel out. If using only one camera you can select either Ch 1 or Ch 2, whichever provides the best picture. The slide switch located on the rear of the Receiver must be set to reflect the channels in use.
