Jasco 45234 user manual Auto Mode 2 Camera Operation, Night Vision

8

Auto Mode (2 Camera Operation)

To have the receiver automatically switch between two active channels, first check the receiver is set to 1/2 position. Next, press the AUTO button on the top panel of the receiver. The green LED will light and the receiver will automatically select between the two active cameras. The monitor will display images from both cameras alternately.

Cycle Time Setting (Time interval between camera selections)

The default cycle time for the receiver is preset to

4 seconds. To change the cycle time, press both of the buttons (Auto and Manual) on top of the receiver simultaneously. The LED will flash; each flash adds one extra second of cycle time. The cycle time can be verified by the number of flashes the LED makes when you release the buttons—one flash equals one second. Cycle time can be set between 2-30 seconds.

NIGHT VISION

The 45233 Wireless Color Camera features Night Vision technology. Objects and images can be seen in little or no light up to 10 ft. The camera uses a special image sensor that automatically detects available light levels. It turns on/off the Infra-Red (IR) LEDS on the front of the camera. These LEDs provide artificial light that allows the camera to