JBL manual Specifications, CS6100 SATELLITES, Nominal Impedance Crossover Frequency

SPECIFICATIONS

CS6100

SATELLITES

Frequency Response (– 6dB): Recommended Amplifier Power Range: Sensitivity (2.83V @ 1 meter):

Nominal Impedance:

Crossover Frequency:

High-Frequency Driver:

Midrange Driver:

Dimensions (H x W x D):

Weight:

CENTER

Frequency Response (– 6dB): Recommended Amplifier Power Range: Sensitivity (2.83V @ 1 meter):

Nominal Impedance:

Crossover Frequency:

High-Frequency Driver:

Midrange Driver:

Dimensions (H x W x D):

Weight:

SUBWOOFER

Frequency Response (– 6dB):

Amplifier:

Driver:

Dimensions (H x W x D, including feet): Weight:

100Hz – 20kHz

10 – 100 Watts

88dB

8 Ohms

3.0kHz; 12dB/octave

1/2" (13mm) Titanium-laminate dome, magnetically shielded

Dual 3-1/2" (89mm), magnetically shielded

11-3/8" x 5-1/8" x 3-3/8" (289mm x 131mm x 86mm)

3.2 lb (1.5kg)

100Hz – 20kHz

10 – 100 Watts

88dB

8 Ohms

3.0kHz; 12dB/octave

1/2" (13mm) Titanium-laminate dome, magnetically shielded

Dual 3-1/2" (89mm), magnetically shielded

5-1/4" x 11-3/8" x 3-3/8" (133mm x 289mm x 86mm)

3.2 lb (1.5kg)

30Hz – 120Hz

150W RMS/300W Peak†

10" (250mm)

18-1/2" x 12-3/4" x 15" (470mm x 324mm x 381mm)

41 lb (18.6kg)

†The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.

10