INSTALLATION WARNINGS AND TIPS
INSTALLATION
ABOUT THESE
INSTRUCTIONS Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical proce- dures. Although these instructions explain how to install Grand Touring Series Component Systems in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself, but instead ask your authorized JBL car audio dealer about professional installa- tion options.
LOUD MUSIC AND
HEARING
Playing loud music in an auto- mobile can hinder your ability to hear traffic, as well as permanently damage your hearing. The maxi-
REAR DECK
PRECAUTION
In some cars, fuel tanks may be located directly beneath the rear deck. Before installation, make sure there is adequate speaker basket clearance before considering this location!
ABOUT THE CONTENTS The Grand Touring Series Component System includes:
•130mm, 160mm and 165mm woofer
•Grille and mounting adapter(s)
•1" tweeter with surface/flush
•Crossover network with mounting screws
NOTE: The supplied crossover network is designed to work with the
• Check clearances on both sides |
of a planned mounting surface |
before drilling any holes or |
installing any screws. Remember |
that the screws can extend |
behind the surface. |
• At the installation sites, locate |
and make a note of all fuel lines, |
hydraulic brake lines, vacuum |
lines and electrical wiring. Use |
extreme caution when cutting or |
drilling in and around these |
areas. |
• Before drilling or cutting holes, |
use a utility knife to remove |
unwanted fabric or vinyl, to keep |
material from snagging in a drill |
bit or saw. |
• For door installations, check the |
clearance with the windows |
throughout the range of the |
window’s travel, and verify that a |
mounted speaker will not inter- |
fere with the window crank or |
power window mechanism. |
Figure 1. Mounting the GTO506c woofer with the grille.
Figure 2. Mounting the GTO6506c woofer with the grille.
Figure 3. Mounting the GTO606c woofer in a standard 165mm opening.
NOTE: The GTO606c use an adapter to fit a variety of different 160mm openings. Select an appro- priate adapter ring and secure it to the vehicle using the
ADAPTERRING
mum volume levels achievable with JBL speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving.
JBL accepts no liability for hearing loss, bodily injury or property damage as a result of use or
misuse of this product.
when connecting the system (see Figure 8A and 8B).
INSTALLATION TIPS
•Always wear protective eyewear when using any tools.
•Turn off all audio components and other electrical devices before you start. Disconnect the
•Keep speakers in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker.
• If mounting speakers elsewhere, |
check for clearance around rear |
deck torsion bars, glove box or |
other structural elements. |
• Do not mount speakers where |
they will get wet. |
• If possible, select a mounting site |
for the crossover network that is |
near the speakers and provides |
easy access for connections. |
Figure 4. Mounting the GTO606c in a 160mm speaker location.
